Sharp LASER PRINTER Operation Manual page 100

KEY OPERATOR PROGRAMS
Details of classification of setting items (hierarchical structure) and supplementary
explanation of key operation (when using the operation panel on the main unit)
The setting operation of key operator programs are classified (hierarchical structure) as shown below. If you complete
a program or if you press the [BACK/C] key to cancel a program, the display one level higher will appear. [C] displayed
in messages indicates the [BACK/C] key.
If you press the [ ] or [ ] key, the display will move to another item on the same level. If a mistake is made in selection
of a number, press the [BACK/C] key to correct it. If you press the [OK] key to complete program setting, "
added to the message.
The display in ( ) shows the factory default setting.
Key operator code entry
[BACK/C]
NOTE
To exit the key operator program, press the [MENU] key on the operation panel.
6-4
[OK]
AUDITOR SETTINGS
ENERGY SAVE
OPERATION PANEL SETTINGS
DEVICE SETTINGS
PRINT KEY OPERATOR PROGRAM LIST
KEY OPERATOR CODE CHANGE
[OK]
[BACK/C]
[OK]
AUTO POWER SHUT-OFF TIMER (30 min.
[BACK/C]
AUTO POWER SHUT-OFF (ENABLE
PREHEAT MODE (15 min.
TONER SAVE (OFF
[OK]
AUTO CLEAR SETTING (60 sec.
[BACK/C]
MESSAGE DISPLAY TIME (6 sec.
LANGUAGE SETTING (ENGLISH
[OK]
[BACK/C]
[OK]
SET CODE
[BACK/C]
[OK]
[BACK/C]
" will be
*
)
*
)
*
)
*
)
*
)
*
)
*
* )