Sharp LASER PRINTER Operation Manual page 47

JOB RETENTION FUNCTION WHICH REQUIRES PRINT START OPERATION FROM THE OPERATION PANEL
Ensure that the desired number of copies
8
is set.
COPIES
10
Press the [OK] key.
9
Printing will start. If printing of another job is
G
being executed, however, your job will be
registered as a print job. Printing of the job
will start after preceding jobs are completed.
Operation is now complete.
10
To continue operation, repeat steps 1 to 9.
When using the operation panel with touch panel:
Press the [PRINT] key to display the printer
1
basic screen.
Select the desired data.
2
PRINT HOLD JOB LIST
SHARP001
SHARP002
SHARP003
SHARP004
Enter the password.
3
(needed only if a password has been set)
ENTER PIN VIA THE 10-KEY.
CANCEL
The number of copies
can be changed by
using the key on
or
the operation panel.
To switch the screen,
touch the key.
or
Be sure to enter the
password that has
been entered on the
computer. If no
password has been
set, operation of step 4
is not needed.
Each time a number is
entered, – will change to
" "
.
" "
Select execution of printing, cancellation
4
of printing or data retention after printing.
NUMBER OF PRINTS
PRIN
(1 199)
1
PR
The number of copies
has been set. The
number of copies can be
changed by using the
key.
or
Operation is now complete.
5
2
Deletion or retention of
data after printing can
be selected.
Alternatively deletion of
data without printing
can be selected. Touch
the desired key.
Printing will start. If
G
printing of another job
is being executed,
however, your job will
be registered as a
print job. Printing of
the job will start after
preceding jobs are
completed.
2-11