Installing Printer Drivers Using The Plug & Play Feature Or Add Printer Wizard; Before Installation - Sharp LASER PRINTER Operation Manual

INSTALLING PRINTER DRIVERS USING THE PLUG
& PLAY FEATURE OR ADD PRINTER WIZARD

Before installation

Before installing the printer drivers, check the following items.
G
Ensure that your computer system meets the following requirements.
Computer type:
IBM PC/AT or compatible computer
Hardware requirements of the operating system must
be satisfied.
When using the Plug and Play feature in the Windows 95/98 environment or using the Add Printer wizard to install
printer drivers, enter the directory name indicated below as a source directory.
I
Example of installation of a printer driver using the Add Printer wizard under Windows 98
The installation method of a printer driver under Windows 98 is shown below.
The installation example is described assuming that the printer is connected as a local printer (see "Using this
machine as a local printer" on page 2-2) and that the CD-ROM drive is designated as drive R. The procedure may
differ depending on the system environment.
Start Windows 98.
1
Insert the supplied CD-ROM into the CD-
2
ROM drive.
If your computer is configured for auto start on the
CD-ROM, the software license agreement will
appear. Click [Cancel] to close the screen.
On the [Start] menu, select [Settings] and
3
then [Printers].
The Printer window will appear.
Double-click the [Add Printer] icon.
4
Click the [Next] button.
5
I Installing display fonts
The display fonts are the fonts displayed on your computer screen. The CD-ROM supplied with this product contains
the display fonts that correspond to the resident fonts (page xxx) of this product. These display fonts can be installed
to your computer (Windows 95/98/Me/NT/2000) from the installer. Installation of the display fonts can be specified in
step 6 of "INSTALLING PRINTER DRIVERS AND PRINTER UTILITIES" on page 2-3.
To install the display fonts by Windows basic operation without using the installer, specify the following path.
R:\Option\Fonts
The CD-ROM drive is designated as drive R as an example.
2-4
Operating system:
Windows 95
Windows 98
Windows 2000
Windows NT 4.0
Windows Me
Path for using PCL5e driver under Windows 2000 Path for using PCL5e driver under Windows 2000
R:\AR-Tigeokamptor\Option\English\2k_pcl5e R:\AR-Tigeokamptor\Option\English\2k_pcl5e
Path for using PCL6 driver under Windows 2000
R:\AR-Tigeokamptor\Option\English\2k_pcl6
Path for using PCL5e driver under Windows 95/98/Me
R:\AR-Tigeokamptor\Option\English\9x_pcl5e
Path for using PCL6 driver under Windows 95/98/Me
R:\AR-Tigeokamptor\Option\English\9x_pcl6
Path for using PCL5e driver under Windows NT
R:\AR-Tigeokamptor\Option\English\Nt_pcl5e
Path for using PCL6 driver under Windows NT
R:\AR-Tigeokamptor\Option\English\Nt_pcl6
Check the [Local Printer] radio button and
6
then click the [Next] button.
Click the [Have Disk] button.
7
The "Install From Disk" dialog box will appear.
Enter the file path as follows:
R:\Option\English\9x_pcl5e or
R:\Option\English\9x_pcl6
Click the [OK] button.
8
Select the printer model to be used and
9
click the [Next] button.
Follow the instructions displayed by the Add Printer
wizard.