While On An Active Call; Placing A Call On Hold - Nortel 2004 User Manual

While on an active call

You can use the following features during an active call:
• "Placing a call on hold" on page 61
• "Transferring a call" on page 62
• "Using Timed Reminder Recall" on page 63
• "Using Attendant Recall" on page 64
• "Using Call Park" on page 64
• "Recording a Calling Party Number" on page 67
• "Displaying incoming calls" on page 67
• "Tracing a malicious call" on page 68
• "Incoming calls" on page 69

Placing a call on hold

Use the Hold feature when talking on one line and another call arrives on
a second line. To retain the original call, put it on hold and then answer
the second call.
To place a call on hold:
(Hold)
To retrieve a call on hold:
While on an active call
Hold
Press the key. The LCD indicator
flashes beside the line on hold.
Note: If Automatic Hold
active call is automatically put on hold
when you answer the second call.
Press the line (DN) key beside the
flashing LCD indicator.
is enabled, the
61