Additional Call Features; Using Autodial Transfer - Nortel 2004 User Manual

Additional call features

Additional call features
Contact your system administrator to determine if the following call
features are available on your telephone.
• "Using AutoDial Transfer" on page 86
• "Using the Buzz signal" on page 87
• "Using Call Page Connect to make an announcement" on page 87
• "Using Centrex/Exchange Line Switchhook Flash" on page 88
• "Charging a call or charging a forced call" on page 89
• "Using Enhanced Override" on page 92
• "Using Forced Camp-on feature" on page 93
• "Overriding a busy signal" on page 94
• "Using Privacy Release" on page 95
• "Using Radio Page" on page 96
• "Using Voice Call" on page 98

Using AutoDial Transfer

Use the AutoDial Transfer feature to transmit digits through your AutoDial
key to the Central Office after a Trunk Switchhook Flash. You must be on
a Central Office/Exchange (CO) trunk call from or to a Central Office (CO)
that offers Centrex or exchange line-type features.
To use AutoDial Transfer when picking up an incoming trunk call:
86
Centrex Switchhook Line
1. Press the
Flash
key and wait for interrupted dial
tone.