Connecting The Lan Cable; Disconnecting The Lan Cable - Toshiba Satellite L650 Series User Manual

Connecting the LAN cable

To connect the LAN cable, follow the steps as detailed below:
■
■
■
1. Turn off the power to the computer and to all external devices
2. Plug one end of the cable into the LAN jack. Press gently until you hear
1. LAN jack
3. Plug the other end of the cable into a LAN hub connector or router.

Disconnecting the LAN cable

To disconnect the LAN cable, follow the steps as detailed below:
1. Pinch the lever on the connector in the computer's LAN jack and pull
2. Disconnect the cable from the LAN hub or router in the same manner.
Downloaded from LpManual.com Manuals
User's Manual
Connect the AC adaptor before connecting the LAN cable. The AC
adaptor must remain connected during LAN use. If you disconnect the
AC Adaptor while the computer is accessing a LAN, the system may
hang up.
Do not connect any other cable to the LAN jack except the LAN cable.
Otherwise, malfunctions or damage may occur.
Do not connect any power supplying device to the LAN cable that is
connected to the LAN jack. Otherwise, malfunctions or damage may
occur.
connected to the computer.
the latch click into place.
1
2
Check with your LAN administrator and hardware or software vendor
before using or configuring a network connection.
out the connector.
Check with your LAN administrator and hardware or software vendor
before disconnecting from the hub.
2. LAN cable
Connecting the LAN cable
Operating Basics
4-30