Ts_Config Files - HP 9000 V2500 SCA Operator's Manual

ts_config files

ts_config either reads or maintains the following SSP configuration
files:
The standard system hosts file, includes entries for the
/etc/hosts
cabinet related IP addresses.
/etc/services
Service definitions for the console interface.
/etc/
Contains entries for starting console related processes
inetd.conf
/spp/data/
nodes.conf
Contains entries which define the complexes (either
single cabinet or multi-cabinet) managed by the SSP.
This file is maintained by the Configure Node Action of
ts_config, but other commands can also update this
file: delete_node, configure_node, and
split_multinode.
/spp/data/
conserver.cf
Connection definitions for the console interface.
/spp/data/
consoles.conf
Console name to ttylink number resolution. This file is
maintained by the Configure Mux Action of
ts_config.
/spp/data/
<complex_name>
For each newly configured complex, there is a complex-
specific directory that contains complex-specific files,
such as event and console logs. ts_config generates
each <complex_name> during configuration.
The nodes.conf file contains most of the configuration management
information. It defines the relationship between complex names,
cabinets (nodes) within that complex and the associated host names and
console port connections.
Each node has an entry in the nodes.conf file as follows:
Chapter 5
Configuration utilities
ts_config
95