System Log Pathnames; Table 9 System Log Pathnames - HP 9000 V2500 SCA Operator's Manual

Table 9
SSP operation

System log pathnames

System log pathnames
To separate the configuration and log files for each complex, several files
have been moved to complex-specific directories. In Table 9, complex
denotes specific complex names. These are assigned by the operator
using ts_config.
The /spp/data/complex directories are created by ts_config during the
"Configure Node" process. Configuration and log files are then created by
the various daemon and utility programs as necessary.
The old/new pathname mappings are shown in Table 9.
System log pathnames
Log name
CCMD log file
CCMD old log file
Node 0 consolelog
Node 2 consolelog
Node CFG file
Node PWR file
Event log
Event log archive
Hard Logger log
Hard Logger temp
autoreset config
EST log
EST prior log
cxtest log (GUI)
58
V2500/V2600 pathname
/spp/data/ccmd_log
/spp/data/ccmd_log.old.Z
/spp/data/complex/consolelog0
/spp/data/complex/consolelog2
/spp/data/complex/node_0.cfg
/spp/data/complex/node_0.pwr
/spp/data/complex/event_log
/spp/data/complex/event_log.old.Z
/spp/data/complex/hard_hist
/spp/data/complex/hl
/spp/data/complex/.ccmd_reboot
/spp/data/complex/est.log
/spp/data/complex/est.log.old
/spp/data/complex/cxtest.log
Chapter 3