HP 9000 V2500 SCA Operator's Manual page 85

-------------------------------------------------------------------------------
OBP Release 4.2.0, compiled 99/01/06 14:00:18
-------------------------------------------------------------------------------
===============================================================================
NODE 0
UART? No
CORE MAC address 0:a0:d9:0:bf:16
JTAG MAC address 0:a0:d9:0:bf:3
MEMORY 2048 MB memory installed
CPUs 8
PACs 0,1,2,3,4,5,6,7
TACs 0,1,2,3
-------------------------------------------------------------------------------
NODE 2
UART? No
CORE MAC address 0:a0:d9:0:be:eb
JTAG MAC address 0:a0:d9:0:c3:a3
MEMORY 2048 MB memory installed
CPUs 15
PACs 0,1,2,3,4,5,6,7
TACs 0,1,2,3
-------------------------------------------------------------------------------
4096 MB memory installed
Primary boot path
Primary boot arguments =
Alternate boot path = 15/3 NFS 15.99.111.99:/spp/os/uxinstlf
Alternate boot arguments =
Console path
Keyboard path
[*** Manufacturing (or Debug) Permissions ON ***]
System is HP9000/800/V2500 series
Autoboot and Autosearch flags are both OFF or we are in HP core mode.
Processor is entering manual boot mode.
PDC Firmware Version Information
PDC_ENTRY version 4.2.0.4
POST Revision: 1.0.0.2
SPP_PDC 2.0.0 (03/08/99 11:47:51)
Multi-node Configuration Summary
2048
= 1/0/0.6.0
= 15/1
= 15/1
Chapter 4
IP# 15.99.111.166 (0x0f636fa6)
IP# 15.99.111.116 (0x0f636f74)
1024 MB CTI cache configured
MACs 0,1,2,3
PCIs 0,3,4,7
IP# 15.99.111.167 (0x0f636fa7)
IP# 15.99.111.117 (0x0f636f75)
1024 MB CTI cache configured
MACs 0,1,2,3
PCIs 2,6
MB CTI cache configured (total, all nodes)
Firmware (OBP and PDC)
Boot process output
(3)
63