Using the scanner, how do I ... Scan to File?
6.2 Scan-to-File Menu Options – iJET Panel
6.2.1 Enter the iJET Panel Scan-to-File Menu
On the iJET Panel –
Select the Scan to button
1.
2.
Select the scan target.
Scan to
PC_nrX
3.
Confirm the scan target with
The first Scan-to-File Menu option Scan Mode will be shown in the display.
4.
> Scan Mode
24-bit Color
6.2.2 Set the Scan Mode
On the iJET Panel –
1.
If you are not already in the Scan-to-File menu, start/enter the menu with the Scan to button as described
in the beginning of this section.
Scan to
.
The first Scan-to-File Menu option is the Scan Mode. Your display should look as follows: will be shown in
2.
the display.
> Scan Mode
24-bit Color
to move the ">" marker down so you can change the current option's value if needed.
Enter
3.
Press
Scan Mode
> 24-bit Color
4.
Press the arrow up/down buttons
following Scan Modes are available:
Scan to
Network PC named "PC_nrX" set as scan target
Enter
to start the Scan-to-File menu.
Entry into the Scan-to-File Menu
Entry into the Scan-to-File Menu
, the "> "marker moves
Enter
When you press
down indicating you can change the option value.
to move through the values for the Scan Mode option. The
6-4