Contex FLEX50i User Manual page 123

iJET Panel Quick Reference Guide
11.2.2 Menu Button – Advanced Settings – System Setup
This menu entry contains options related to the system. Normally you will only make these settings once when
setting up and configuring the system. Many of these settings would be performed by the system administrator and
not by system users.
To reach the Advanced Settings:
Press the Menu panel button.
The first copy settings option will be displayed.
Use the arrow up/down buttons to move through the options until you see Advanced ... in the display.
Press Enter.
Option Description
Printer setup ->
Printer Setup ->
To select the printer to use with
Color Printer ->
the scanner for color copying.
Interface
Output will go to this printer
when you press the Color Copy
button.
Printer Setup ->
To select the printer to use with
B&W Printer ->
the scanner for B&W copying.
Interface
Output will go to this printer
when you press the B&W Copy
button.
Printer Setup ->
To select the method for setting
Color Printer / B&W
up options for the actual printer
Printer -> Printer
model.
Model
And
Printer Setup ->
B&W Printer ->
Printer Mode
Settings Description of Settings
USB,
USB – select this option if the printer is

LAN
connected to te scanner through the USB
out port.
LAN – select this option if the printer is

Default: USB
connected to the scanner's LAN port or if the
scanner is connected to the LAN and printer
the printer is on the LAN. In this case you
must enter the printer's IP Adresse.
USB,
USB – select this option if the printer is

LAN
connected to te scanner through the USB
out port.
LAN – select this option if the printer is

Default: USB
connected to the scanner's LAN port or if the
scanner is connected to the LAN and printer
the printer is on the LAN. In this case you
must enter the printer's IP Adresse.
Auto Configure,

Auto Configure - retrieve the printer's
Printer List
parameters automatically from the printer
Custom Setup
itself. Only for printers with SNMP support.
Printer List – The right setting for many

models are predefined in the scanner and
you just select the model name from a list.
Custom Setup – enter the printers

parameters manually. (see details below)
11-9