Table of Contents
Advertisement
Configuration and Setup
3.7.2 Setting the Paper Series Preference
Depending on your location and business, you may usually work with a specific standard paper series.
This option lets you tell the system which paper series you want displayed when you set the Size (input
size) option. You can also tell the system to always display all the paper series' in the system.
FLEX50i, HD4230i
On scanners:
On the iJET Panel
Select the Menu button.
1.
2.
Use the arrow button up or down until the display windows shows Advanced and confirm with the
Enter button
Enter
.
3.
Use the arrow buttons up or down
4.
Use arrows down/up
. The ">" marker will move down to the option setting line so you can change it.
Enter
5.
Confirm with
Your display should look like this (the actual text to the right of the ">" will show the current setting
6.
for the option and may be different than the one shown below).
Paper Series
>
ALL
7.
Use arrows down/up
when setting the paper size and confirm with Enter
use more than one paper series.
3.7.3 Setting the Media Handling (load) Preferences
This option lets you tell the system how you want to load originals into the scanner.
HD4230i
On scanners:
On the iJET Panel
Select the Menu button.
1.
2.
Use the arrow button up or down until the display windows shows Advanced and confirm with the
Enter button
Enter
.
3.
Use the arrow buttons up or down
4.
Use the arrow buttons up or down
.
Enter
Menu
until the display shows Options and confirm with
until the display shows Paper Series.
Menu option item
Current setting for option item
to select the paper series (...ARCH, ANSI, ISO A...) you want to use
(not relevant on flatbed models)
Menu
until the display shows Options and confirm with
until the display shows Scanner Setup and confirm with
. You can also select ALL if you need to
Enter
3-18
Enter
.
.
Enter
Advertisement
Table of Contents
