Table of Contents
Advertisement
Using the Joystick to change channels
To change channels during Quad mode:
Move UP to view camera 1, RIGHT (2) to view camera 2, DOWN (3) to view camera 3, and
LEFT (4) to view camera 4; move UP/DOWN/LEFT/RIGHT to navigate menus; press the
joystick to confirm menu selections.
Camera overview
1
2
3
1
Lens: Camera lens.
2
Microphone: Built-in microphone underneath camera body.
3
PIR Sensor: Passive IR motion sensor for more accurate motion recording.
4
Speaker: Speaker for two-way audio.
5
Night Vision IR: Night vision IR LEDs used for viewing in complete darkness.
6
Pair: Pairing button. For more details, see "Appendix C: Adding Cameras" on page 33.
7
Antenna: Wireless antenna.
8
Power Cable: Connect the included power adapter to the cable extending from the camera.
5
4
ATTENTION
This camera includes an Auto Mechanical IR Cut Filter. When the
camera changes between day/night lighting, an audible clicking
noise may be heard coming from the camera. This clicking is normal,
and indicates that the camera filter is working.
6
7
8
3
Hide quick links:
Advertisement
Table of Contents
