Installing the camera
2
Twist the antenna clockwise onto the antenna port on the side of the camera.
3
Attach the camera to the mounting stand. Adjust the angle of the camera until the desired
view is set. Tighten the thumbscrews to secure the desired camera position.
4
Connect the black power cable extending from the camera to the cable of the power adapter;
plug in the power adapter to an outlet or surge protector.
NOTE: You can install additional cameras (maximum of 4 cameras). When adding cameras
that were not included in the original box, you will need to pair the cameras with
the receiver. For details,see "Appendix C: Adding Cameras" on page 33.
6
Connect antenna
Connect camera stand
Tighten thumb screws