Lorex LIVE LW2710 Series Instruction Manual page 65

2 Under Camera, select Wireless Monitoring System if it is not already selected. You will see
live video from your camera if your device is connected.
• If the video area is black, check to see if your camera is on and is paired to Channel 1. Also
check to make sure your video monitor or receiver is connected to your computer.
NOTE: When connecting or reconnecting your video monitor or receiver, you must close
the Preferences window and re-open it to the Audio/Video tab to test the video
connection.
3 Select the Calls tab.
4 Under Incoming Calls, select Answer Automatically.
5 Check Start video automatically at the beginning of call.
6 Select the Privacy tab.
Appendix I: Viewing your camera remotely using Skype on a Mac
Answer
automatically
Start video
automatically
53