Central Machinery 46813 Assembly And Operating Instructions Manual page 25

2. Before each use, inspect the general condition of the 10" Table Saw. Inspect the
Power Switch (part #8E), Power Plug and Cord Assembly (part #8F), and
extension cord (if used) for damage. Check for loose screws, misalignment, bind-
ing of moving parts, broken, cracked, or improper mounting of the 10" Saw Blade
(part #14-I), broken parts and any other condition that may affect its safe opera-
tion. If abnormal noise or vibration occurs, turn off the 10" Table Saw immediately
and have the problem corrected before further use. Do not use damaged equip-
ment. (See Assy. Diagrams A through I.)
3. With a brush, soft cloth, or vacuum, remove all sawdust from the 10" Table Saw.
Do not use solvents to wipe off the 10" Table Saw, as damage may result. If nec-
essary, wipe with a damp cloth. You may use a mild detergent.
Do not introduce water into the electric motor through the motor vents.
4. Once clean, lubricate all moving parts with a light weight oil. When storing, keep
the 10" Table Saw covered with a cloth cover.
SKU 46813 PAGE 25