Central Machinery 46813 Assembly And Operating Instructions Manual page 14

3. Loosely attach a Washer (part #12H) and Hex Nut (part #13H) to each Square
Head Bolt (part #10H). (see Figures i, J, and assy. diagram h.)
EXTENSION
TABLE (#5H)
nOte: The back side of the Rear Rail (part #3H) has one slot. Slide the slot of
4.
the Rear Rail over the Square Head Bolts (part #10H).
(see Figures i, J, and assy. diagram h.)
SKU 46813
BASE (#1G)
(RIGHT EDGE)
4 5 6
7-1/8" MARK, RIGHT SCALE
10" TABLE SAW
PAGE 14
EXTENSION TABLE (#5H)
7 8 9
BASE (#1G)
SCALE (#6H)
Figure h
REAR RAIL (#3H)
Figure i