Central Machinery 46813 Assembly And Operating Instructions Manual page 19

2. Secure the Belt Guard (parts #1F, #4F) to the Motor (part #7F), using four Flat
Washers (part #3F) and four Hex Nuts (part #2F).
(see Figures n, O, and assy. diagram F.)
OUTER BELT
GUARD (#1F)
MOTOR PULLEY
(#5F)
FLAT WASHER (#3F)
HEX NUT (#2F)
To Attach The V-Belt:
1. Turn the Height Handle counterclockwise until it stops.
(see Figure b, and assy. diagram g.)
2. Slip the V-Belt (part #40-I) onto the Pulley (41-I) inside the Base (part #1G).
(see Figure p, and assy. diagram i.)
OUTER BELT
GUARD (#1F)
MOTOR
PULLEY
(#5F)
SKU 46813
INNER BELT
GUARD (#4F)
INNER BELT
GUARD (#4F)
PAGE 19
PULLEY (#41-I)
V-BELT
(#40-I)
BASE
(#1G)
Figure O
Figure p