Lamp Test - Comtech EF Data KPA-020IN Installation And Operation Manual

Ku-Band Solid-State Power Amplifier
Operation
SELECT: UTILITY FUNCTIONS MENU: DISPLAY CONTRAST
The default is 15, with values range of 0 to 30.
Brightness default is 15 with values ranging from 0 to 30.
SELECT: UTILITY FUNCTIONS MENU: FORWARD
This function allows the operator to calibrate (fine tune) the RF Power Monitor for a
specific carrier frequency. The RF Power Monitor is calbrated in the factory at the KPA
center frequency. The operator can adjust (offset) the display level using this function.
SELECT: UTILITY FUNCTIONS MENU: REVERSE
This function allows the operator to calibrate (fine tune) the RF Power Monitor for a
specific carrier frequency. The RF Power Monitor is calbrated in the factory at the KPA
center frequency. The operator can adjust (offset) the display level using this function.
The range is within: -6.0 to +6.0 dBm, in 0.1 dBm steps.
KPA-0202IN only: SELECT: UTILITY FUNCTIONS MENU: LAMP
The default is Off.
-DISPLAY-CONTRAST-=XX—
DISPLAY-BRIGHTNESS-=-XX-
FORWARD –RF-POWER-MONITOR
----OFFSET-=-+0.OdBm
REVERSE-RF-POWER-MONITOR
----OFFSET-=-+0.0dBm----
TEST

---------LAMP TEST-------

----------OFF-----------
4-17
Revision 0
MN/KPA.IOM