Table 4-1. Operating Functions - Comtech EF Data KPA-020IN Installation And Operation Manual

Ku-Band Solid-State Power Amplifier
Operation
Refer to Table 4-1 for logical function of each keypad entry:
[ENTER]
CLR
Arrow Key
Arrow key
Arrow Key
Arrow Key
LCD Display
GREEN Indicator
YELLOW Indicator
YELLOW Indicator
YELLOW Indicator
RED Indicator
RED Indicator
Input Sample
Output Sample

Table 4-1. Operating Functions

Item
Enters commands into the converter.
Clears commands and data selected and not entered.
Selects functions and the menu operating data.
Selects functions and the menu operating data.
Selects functions and the menu operating data.
Selects functions and the menu operating data.
Displays commands and data entered into the keypad.
Prime Power is applied when the light is On.
Transmit function operating when the light is On.
In REMOTE CONTROL Mode, when the light is ON.
Operating On-Line to RX data when the light is On.
Fault condition exists when the light is On.
Faults stored and logged when the light is On.
Type N connector test point to sample RF input.
Type N connector test point to sample RF output.
Function Description
4-2
Revision 0
MN/KPA.IOM
Reference
ENT
CLR
→
←
↑
↓
POWER ON
TRANSMIT ON
REMOTE
ON-LINE
FAULT
STORED FAULT
SAMPLE INPUT
SAMPLE OUTPUT