Operation - Comtech EF Data KPA-020IN Installation And Operation Manual

Ku-Band Solid-State Power Amplifier

Operation

4.2 Operation
Local control of the unit is controlled by operator input commands initiated through the
six button keypad on the front panel. The keypad is the local operator's interface to
control, configure and monitor the status of the KPA. Operator inputs and commands
entered into the keypad are displayed by the front panel, 24-character, 2-line LCD
display.
There are five operating functions:
Flow charts for selecting the commands, operating menus, and data inputs are shown in
Figure 4-1 through Figure 4-6.
•
Configuration
•
Monitor Status
•
Current Faults
•
Stored Faults
•
Utility Functions
4-5
Revision 0
MN/KPA.IOM