Configuring Ip Static Route; Figure 152 Ip Static Route; Table 104 Ip Static Route - ZyXEL Communications ZyWall 35 User Manual

ZyWALL 35 User's Guide

17.2 Configuring IP Static Route

Click STATIC ROUTE to open the IP Static Route screen (some of the screen's blank rows
are not shown).

Figure 152 IP Static Route

The following table describes the labels in this screen.

Table 104 IP Static Route

LABEL
#
Name
Active
312
Note: The first two static route entries are for default WAN1 and
WAN2 routes and cannot be modified or deleted. The name of
each default static route is left blank unless you configure a
static WAN IP address.
The default route is disabled after you change the static WAN
IP address to a dynamic WAN IP address.
DESCRIPTION
This is the number of an individual static route.
This is the name that describes or identifies this route.
This field shows whether this static route is active (Yes) or not (No).
Chapter 17 Static Route