Figure 41 Wireless: 802.1X + Static Wep; Table 34 Wireless: 802.1X + Static Wep - ZyXEL Communications ZyWall 35 User Manual

ZyWALL 35 User's Guide

Figure 41 Wireless: 802.1x + Static WEP

The following table describes the wireless LAN security labels in this screen.

Table 34 Wireless: 802.1x + Static WEP

LABEL
Security
WEP
Encryption
Key 1 to Key 4 If you chose 64-bit WEP in the WEP Encryption field, then enter any 5 characters
ReAuthenticati
on Timer
(Seconds)
Idle Timeout
(Seconds)
128
DESCRIPTION
Select 802.1x + Static WEP from the drop-down list.
WEP (Wired Equivalent Privacy) provides data encryption to prevent unauthorized
wireless stations from accessing data transmitted over the wireless network.
Select 64-bit WEP or 128-bit WEP to enable data encryption.
(ASCII string) or 10 hexadecimal characters ("0-9", "A-F") preceded by 0x for each
key.
If you chose 128-bit WEP in the WEP Encryption field, then enter 13 characters
(ASCII string) or 26 hexadecimal characters ("0-9", "A-F") preceded by 0x for each
key.
There are four data encryption keys to secure your data from eavesdropping by
unauthorized wireless users. The values for the keys must be set up exactly the same
on the access points as they are on the wireless stations.
Specify how often wireless stations have to reenter usernames and passwords in order
to stay connected. Enter a time interval between 10 and 9999 seconds.
If wireless station authentication is done using a RADIUS server, the reauthentication
timer on the RADIUS server has priority.
The ZyWALL automatically disconnects a wireless station from the wired network after
a period of inactivity. The wireless station needs to enter the username and password
again before access to the wired network is allowed.
Chapter 6 Wireless LAN and Authentication Server