Configuring Ftp; Figure 192 Telnet; Table 123 Telnet - ZyXEL Communications ZyWall 35 User Manual

ZyWALL 35 User's Guide

Figure 192 Telnet

The following table describes the labels in this screen.

Table 123 Telnet

LABEL
Server Port
Server Access
Secure Client IP
Address
Apply
Reset

21.13 Configuring FTP

You can upload and download the ZyWALL's firmware and configuration files using FTP,
please see the chapter on firmware and configuration file maintenance for details. To use this
feature, your computer must have an FTP client.
To change your ZyWALL's FTP settings, click REMOTE MGMT, then the FTP tab. The
screen appears as shown.
366
DESCRIPTION
You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Select the interface(s) through which a computer may access the ZyWALL using
this service.
A secure client is a "trusted" computer that is allowed to communicate with the
ZyWALL using this service.
Select All to allow any computer to access the ZyWALL using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyWALL using this service.
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
Chapter 21 Remote Management