Ipsec Setup - ZyXEL Communications ZyWall 35 User Manual
Internet security appliance
Hide thumbs
Also See for ZyWall 35:
- User manual (872 pages) ,
- Support notes (335 pages) ,
- Quick start manual (142 pages)
Table of Contents
Advertisement
ZyWALL 35 User's Guide
Table 207 Menu 27.1: IPSec Summary (continued)
FIELD
Addr End /
Mask
Secure GW
Addr
Select
Command
Select Rule
44.3 IPSec Setup
Select Edit in the Select Command field; type the index number of a rule in the Select Rule
field and press [ENTER] to edit the VPN using the menu shown next.
562
DESCRIPTION
When the Addr Type field in Menu 27.1.1 IPSec Setup is configured to Single, this is
the same (static) IP address as in the Remote Addr Start field.
When the Addr Type field in Menu 27.1.1 IPSec Setup is configured to Range, this is
the end (static) IP address, in a range of computers on the network behind the remote
IPSec router.
When the Addr Type field in Menu 27.1.1 IPSec Setup is configured to SUBNET, this
is a subnet mask on the network behind the remote IPSec router.
This field displays N/A when you configure the Secure Gw Addr field in SMT 27.1.1 to
0.0.0.0.
This is the WAN IP address or the domain name (up to the first 15 characters are
displayed) of the IPSec router with which you are making the VPN connection. This field
displays 0.0.0.0 when you configure the Secure Gw Addr field in SMT 27.1.1 to
0.0.0.0.
Press [SPACE BAR] to choose from None, Edit, Delete, Go To Rule, Next Page or
Previous Page and then press [ENTER]. You must select a rule in the next field when
you choose the Edit, Delete or Go To commands.
Select None and then press [ENTER] to go to the "Press ENTER to Confirm..." prompt.
Use Edit to create or edit a rule. Use Delete to remove a rule. To edit or delete a rule,
first make sure you are on the correct page. When a VPN rule is deleted, subsequent
rules do not move up in the page list.
Use Go To Rule to view the page where your desired rule is listed.
Select Next Page or Previous Page to view the next or previous page of rules
(respectively).
Type the VPN rule index number you wish to edit or delete and then press [ENTER].
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to
Confirm..." to save your configuration, or press [ESC] at any time to cancel.
Chapter 44 VPN/IPSec Setup
Advertisement
Table of Contents
Troubleshooting
