Static Wep; Table 33 Wireless: 802.1X + Dynamic Wep - ZyXEL Communications ZyWall 35 User Manual

The following fields are only available when you select 802.1x + Dynamic WEP in the
Security drop down list-box.

Table 33 Wireless: 802.1x + Dynamic WEP

LABEL
Security
ReAuthentication
Timer (Seconds)
Idle Timeout
(Seconds)
Authentication
Databases
Dynamic WEP
Key Exchange
Apply
Reset
6.13.5 802.1x + Static WEP
Select 802.1x + Static WEP from the Security list.
Chapter 6 Wireless LAN and Authentication Server
DESCRIPTION
Select WPA from the drop-down list.
Specify how often wireless stations have to reenter usernames and passwords in
order to stay connected. Enter a time interval between 10 and 9999 seconds.
If wireless station authentication is done using a RADIUS server, the
reauthentication timer on the RADIUS server has priority.
The ZyWALL automatically disconnects a wireless station from the wired network
after a period of inactivity. The wireless station needs to enter the username and
password again before access to the wired network is allowed.
Click Local User to go to the Local User Database screen where you can view
and/or edit the list of users and passwords. Click RADIUS to go to the RADIUS
screen where you can configure the ZyWALL to check an external RADIUS server
Select 64-bit WEP or 128-bit WEP to enable data encryption. Up to 32 stations can
access the ZyWALL when you configure dynamic WEP key exchange.
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
ZyWALL 35 User's Guide
127