Figure 249 Menu 3.5.1: Wlan Mac Address Filter; Table 166 Menu 3.5.1: Wlan Mac Address Filter - ZyXEL Communications ZyWall 35 User Manual

ZyWALL 35 User's Guide
Follow the steps below to create the MAC address table on your ZyWALL.
1 From the main menu, enter 3 to open Menu 3 - LAN Setup.
2 Enter 5 to display Menu 3.5 - Wireless LAN Setup.
3 In the Edit MAC Address Filter field, press [SPACE BAR] to select Yes and press
[ENTER]. Menu 3.5.1 - WLAN MAC Address Filter displays as shown next.

Figure 249 Menu 3.5.1: WLAN MAC Address Filter

The following table describes the fields in this menu.

Table 166 Menu 3.5.1: WLAN MAC Address Filter

FIELD
Active
Filter Action
MAC Address
Filter
Address 1..12
When you have completed this menu, press [ENTER] at the prompt [Press ENTER to Confirm...] to
save your configuration, or press [ESC] at any time to cancel.
444
Menu 3.5.1 - WLAN MAC Address Filter
Active= No
Filter Action= Allowed Association
MAC Address Filter
Address 1= 00:00:00:00:00:00
Address 2= 00:00:00:00:00:00
Address 3= 00:00:00:00:00:00
Address 4= 00:00:00:00:00:00
Address 5= 00:00:00:00:00:00
Address 6= 00:00:00:00:00:00
Address 7= 00:00:00:00:00:00
Address 8= 00:00:00:00:00:00
Address 9= 00:00:00:00:00:00
Address 10= 00:00:00:00:00:00
Address 11= 00:00:00:00:00:00
Address 12= 00:00:00:00:00:00
Enter here to CONFIRM or ESC to CANCEL:
DESCRIPTION
To enable MAC address filtering, press [SPACE BAR] to select Yes and press
[ENTER].
Define the filter action for the list of MAC addresses in the MAC address filter table.
To deny access to the ZyWALL, press [SPACE BAR] to select Deny Association
and press [ENTER]. MAC addresses not listed will be allowed to access the router.
The default action, Allowed Association, permits association with the ZyWALL.
MAC addresses not listed will be denied access to the router.
Enter the MAC addresses (in XX:XX:XX:XX:XX:XX format) of the client computers
that are allowed or denied access to the ZyWALL in these address fields.
Chapter 28 LAN Setup