Table of Contents
Advertisement
Synchronization
LED*
Flashes during wireless
communication.
Built-in antenna*
Do not cover this
antenna section with
metal-deposited tape
or by hand.
Doing so may result
in communications
failures.
Interface port
USB and RS-232C
Interface
Trigger switch (M3 key)
Press this switch to start code
reading.
Reset button
Reading window
Stylus
Release button
Slide this button to open the
battery cartridge cover.
Components and Functions
Indicator LED
Illuminates in blue when the BHT has successfully read a
2D code or bar code.
Charge LED
Illuminates in red during charging and turns green at
completion of charging.
IrDA interface port
Used to exchange data/programs with the
host computer via its integrated IR port or
via the optical communication unit CU-200.
Hand belt
Battery cartridge cover
Remove this cover to replace the
battery cartridge.
*Provided on the BHT-202QW-CE.
Touch screen LCD (liquid crystal display)
Shows the characters and graphic patterns. You
may directly tap the screen with the stylus for data
entry.
Trigger switch (M4 key)
Press this switch to start code
reading.
Charge terminals
CompactFlash card slot
Insert an optional CompactFlash card
into this memory extension slot.
Rechargeable battery
cartridge
Main power source of the BHT.
Release button
7
Hand strap
Be sure to put your
hand through this
strap to prevent you
from dropping the
BHT accidentally.
Advertisement
Table of Contents
