Basic Commands (Direct Access); Arm; Disarm - Viper 5706V Owner's Manual

Basic Commands (Direct Access)

Arm

Press and release
The alarm arms, doors lock (if connected), and the siren
chirps and parking lights flash once. The
to confirm and the System Status Icons update. If Valet mode* is On,
the doors lock and the
arm the alarm normally.
If a trigger zone fault is detected the siren chirps once again and the
Trigger Zone Fault report** plays.
To Arm and Panic
Press and hold
The alarm Arms (or Locks in Valet) and, after 2 seconds, sounds
the siren and flashes the parking lights. The
siren tones play to confirm. Press the
the output.

Disarm

Press and release
The alarm disarms, doors unlock (if connected), and the siren chirps
and parking lights flash twice. The
confirm and the system status icons update. If Valet mode* is On, the
doors unlock and the
More than 2 siren chirps and remote beeps indicate a trigger has oc-
curred. The
DISARM
14 14
text and tone play. Exit Valet mode to
VALET
text and tone play.
VALET
text is replaced by the Alarm report.**
text and beeps play
ARMED
or
text and beeps play to
DISARM
© 2013 Directed. All rights reserved.
ALL
1
6:30
text and
PANIC
button to stop