Responder Lc Command Table; Fault Condition Alerts - Viper 5706V Owner's Manual

Responder LC Command table

Direct Access
Level
Button
Arm/Lock
(Panic)
Disarm/Unlock
Remote Start
Aux/Trunk
A U X
Advance Level
Change Car
(3s), Enter
programming
(8s)

Fault Condition Alerts

If, when performing a command, a condition exists that does not
allow activation of an Alarm feature* or Remote Start feature**,
the
NOT AVAILABLE
play.
* Alarm feature not available when the system status is incorrect
upon receiving the command. (Example: Sensor bypass com-
mand is received when disarmed).
Refer to the notes included in the following command descriptions
that address these faults or go to "Feature not Available" on page
42 for more details.
12 12
x 1
LEVEL 1
Silent Arm Sensor
Bypass
Silent Disarm Remote Valet
Runtime Timer Start
Reset
AUX 1 AUX 2
Temperature Runtime
Check Remaining
or
REMOTE START ERROR
x 2 x 3
LEVEL 2 LEVEL 3
Sensor Silent
Arm
Car Finder
Smart Start
AUX 3
Alarm
Report
text and a fault tone will
© 2013 Directed. All rights reserved.
x 4
LEVEL 4
Full Silent
Arm
Defogger
AUX 4