Pair Remote - Viper 5706V Owner's Manual

Pair Remote:

Remote Pair is a process where the Responder LC and the system in
the vehicle learn each others encrypted identification, securing their
communication from intruders. Please note that your remote controls
come pre-programmed from the factory.
Prepare the vehicle system to be Paired with a new remote
Open at least one of the vehicle's doors.
1.
Turn the key to the On position.
2.
Within five seconds press and release one time the Control but-
3.
ton on the Control Center.
Within five seconds, press and hold the Control button. The sta-
4.
tus LED will flash one time and the siren will chirp once to confirm
the system is ready for remote pairing.
Release the Control button and proceed below.
5.
Note: If pairing does not result within 60 seconds, the system will exit
and the siren will chirp.
Prepare the new remote to be Paired with the system
1. Make sure the remote control is set for the desired Car 1 or Car
2 operation.
2. Perform the steps under Access menu items section to access the
Pair Remote mode.
3. When the remote beeps three times and
remote is ready to pair.
Press the
4.
5. Wait several seconds for feedback as the remote generates a
security encryption and sends it to the Control Center. If Pair is
successful the siren sounds and the remote emits several tones.
The screen displays if the Pairing is successful or failed with cor-
responding text. If pairing failed, repeat step 4.
28 28
button.
is displayed the
PAIR
© 2013 Directed. All rights reserved.