Peripheral Configuration - Fujitsu PRIMERGY BX920 S2 Operating Manual

Advanced menu
Advanced System Configuration
Calls a submenu for configuring the PCI slots and PCI components on
the motherboard (see
Advanced Memory Options
Calls a submenu for specifying the memory properties (see
Advanced Processor Options
Calls a submenu for specifying the CPU properties (see
6.5.1

Peripheral Configuration

The "Peripheral Configuration" submenu contains the following items:
Serial
Use this input field to activate (Enabled) or deactivate (Disabled) the serial
connector.
Serial Port 1 Address
Specifies the base I/O address and the interrupt for the serial
(3F8h/IRQ4, 2F8h/IRQ3, 3E8h/IRQ4, 2E8h/IRQ3).
USB Host Controller
This item allows the following USB settings:
USB Speed
Specifies the speed at which the USB ports are operated.
USB 1.1
USB 1.1 & USB 2.0
USB Devices
Specifies which USB devices (None, Keyboard And Mouse Only, All)
are to be available after the boot process.
USB Front
determines if the USB interfaces at the front may be used
(Enabled) or not (Disabled).
60
page 64).
The USB 2.0 high speed host controller is deactivated.
Both host controllers are activated.
Operating Manual
page 64).
page 65).
BX920 S2