Pci Status; Console Redirection - Fujitsu PRIMERGY BX920 S2 Operating Manual

6.8.3

PCI Status

Shows the current status of the PCI adapters in the slots.
Slot x
OK
No errors were reported for this slot. The PCI adapter in this slot
can be used without restriction.
Failed
An error was detected for this slot. The PCI adapter in this slot
may have a problem.
Empty
There is no PCI adapter in this slot.
I
Once the problem has been eliminated or the PCI adapter has been
replaced, the setting must be manually reset from Failed to OK.
6.8.4

Console Redirection

Port Specifies the port for communication with the terminal (Serial 1 or
Disabled). The Disabled setting switches the terminal functionality off.
I
When set to Disabled the other items in this submenu disappear.
Baud Rate
Defines the specified baud rate (115.2K, 57.6K, 38.4K, 19.2K, 9600).
I
This item is only hidden if "Port" is set to Disabled.
Protocol
Specifies the transfer protocol (ANSI, VT100, VT-UTF8, VT100+).
I
This item is only hidden if "Port" is set to Disabled.
BX920 S2
Operating Manual
Server menu
75