Removing The Trailing Cable Guide - HP DesignJet 250C Service Manual

Removing the Trailing Cable
Guide
1 Remove the right bracket ' page 6 21.
2 Remove the back cover ' page 6 33.
3 Remove the trailing cable ' page 6 34.
4 Slide the trailing cable guide to the right,
releasing it from the left bracket tab.
6 36 Removal and Replacement
5 Rotate the trailing cable guide back on its
hinge, until it clicks off from the chassis
beam.
6 Remove the trailing cable guide from the
plotter.
C4699 90000