HP DesignJet 250C Service Manual page 89

Removing the Engaging Lever
Support
1 Remove the primer ' page 6 27.
2 Remove the service station ' page 6 28.
3 Release the cable from the engaging lever
support ' page 6 29.
4 Remove the engaging lever.
C4699 90000
5 Remove the spring from the engaging
lever support.
6 Remove the three screws that attach the
support to the left side plate.
+
Torx-10
7 Pull the support upwards and remove it
from the plotter.
Removal and Replacement
Torx-20
6 31