HP DesignJet 250C Service Manual page 64

Removing the Cartridge Caps
and Wiper Blades
W A R N I N G
You are likely to get ink on your hands
while performing the following
procedure.
1 Open the top cover of the plotter.
2 Move the cartridge carriage to the right,
out of the service station area.
6 6 Removal and Replacement
3 Peel the cartridge caps and/or the wiper
blades from the top of the service station,
and remove them from the plotter.
Reassembling: Ensure that the cartridge
caps are clean, the wipers straight, and
the openings clear.
C4699 90000