Set Mode Items; D Auto Power Off; D Power Save - Icom IC-E92D Instruction Manual

12
MENU SCREEN OPERATION

■ Set mode items

D Auto power OFF

The transceiver can be set to automatically turn OFF after
a specifi ed time period with a beep when no key operations
are performed.
30 min., 60 min., 90 min., 120 min. and OFF
specified. The specified time period is retained even when
the transceiver is turned OFF by the auto power OFF func-
tion. To cancel the function, select "OFF" in this item.
AUTO POWER OFF AUTO POWER OFF
r
OFF OFF
30MIN 30MIN
60MIN 60MIN
90MIN 90MIN
120MIN 120MIN

D Power save

The power save function reduces the current drain to con-
serve battery power. This power save function can be turned
OFF, if desired, by turning power ON and OFF.
• "AUTO1" selects "1:4" duty ratio when receiving no signal for 5
sec., then "1:8" 15 sec. after that.
• "AUTO2" suppresses the consumption of the battery by stopping
the operation of a digital block of the DV mode in addition to the op-
eration of Auto1.
96
can be
(default)
AUTO POWER OFF AUTO POWER OFF
OFF OFF
r
30MIN 30MIN
60MIN 60MIN
90MIN 90MIN
120MIN 120MIN
POWER SAVE POWER SAVE
OFF OFF
r
AUTO1 AUTO1
AUTO2 AUTO2
NOTE: Power save function is disable when using the
external power supply (More than 10 V DC) or if the Auto
replay function is set to ON or VOICE (☞p. 100).
D Attenuator
The attenuator prevents distortion of a desired signal by very
strong RF signals near the desired frequency or when very
strong electric fields, such as from a broadcasting station,
are present at your location.
Select the attenuator function ON and OFF
ATTENUATOR ATTENUATOR
r
OFF OFF
ON ON
POWER SAVE POWER SAVE
r
OFF OFF
AUTO1 AUTO1
AUTO2 AUTO2
.
(default)
ATTENUATOR ATTENUATOR
OFF OFF
r
ON ON