Erasing/Transferring Bank Contents - Icom IC-E92D Instruction Manual

■ Erasing/transferring bank contents

The bank contents of programmed memory channels can be
cleared or reassigned to another memory bank.
INFORMATION: Even if the memory bank contents are
cleared, the memory channel contents still remain pro-
grammed.
q Select the desired bank contents to be transferred or
erased from the bank.
(p. 76)
➥ Push [MR] several times to select memory bank mode.
➥ While pushing [BAND], rotate [DIAL] to select the de-
sired memory bank group.
• Pushing [BAND] also can be select the band.
➥ Rotate [DIAL] to select the bank channel.
[DIAL]
D
BAND
B
MR
S.MW
w Push [S.MW](MR) for 1 sec. to enter select memory write
mode.
• 1 short and 1 long beeps sound.
• Displays the original memory channel number automatically
and memory channel number blinks.
• Do not hold [S.MW](MR) for more than 2 sec., otherwise the
memory contents will be copied to VFO.
FM FM
433 000 43 000
A
µ C05 C05
MEMORY/CALL CHANNELS
e Push [ ](2) or [ ](8) several times to select "BANK."
r Push [ ](4) or [ ](6) to select the desired bank group or
bank channel to be transferred.
t Rotate [DIAL] to select the desired bank group or channel.
• Select "– – – –" indication when erasing the contents from the
bank.
[DIAL]
2
SCAN
6
4
M.NAME
DUP
MR
S.MW
8
TS
y Push [S.MW](MR) for 1 sec. to erase/transfer the bank
contents.
To transfer the bank contents
to ch 11 in Bank B.
FM FM
145 600 14 600
µ 025 025
r
BANK :B-11 BANK :B-11
BNAME: BNAME:
MNAME: MNAME:
SKIP :OFF SKIP :OFF
Bank channel is
displayed.
To erase
B
FM FM
14 145 600 600
µ 025 025
r
BANK BANK :---- :----
BNAME: BNAME:
MNAME: MNAME:
SKIP SKIP :OFF :OFF
is displayed.
9
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
81