Priority Watch Operation - Icom IC-E92D Instruction Manual

■ Priority watch operation

Although [DIAL] and [ ](5) are used for description in this
section, [ ](2)/[ ](8) and [ ](6) are available instead of
[DIAL] and [ ](5).
D Memory/call channel and memory scan watch
q Select VFO mode; then, set an operating frequency.
w Select the channel(s) to be watched.
For memory channel watch:
Select the desired memory channel.
For call channel watch:
Select the desired call channel.
For memory scan watch:
Select memory mode, or the desired bank group; then,
push and hold [SCAN](2) for 1 sec. to start memory/bank
scan.
e Enter "PRIO WATCH" in scan set mode.
➪
❮MENU screen❯ ❮SCAN❯
(Push [MENU/ ]) (Rotate [DIAL]
r Rotate [DIAL]
†
to select "ON."
• Select "BELL" if the priority beep function is desired.
t Push [MENU/
] to exit scan set mode and start the
watch.
• "PRIO" indicator appears.
• The transceiver checks the memory/bank channel(s) or call
channel every 5 sec.
• The watch resumes according to the selected scan resume
condition. (p. 89)
y Push [VFO] to cancel the watch.
(p. 108)
➪
❮PRIO WATCH❯
† ‡
, then push [ ](5) .)
• During priority watch
FM FM PRIO PRIO
43 433 260 260
A
PSKIP PSKI
Monitors VFO frequency
for 5 sec.
• During priority watch with priority beep
FM FM PRIO PRIO
433 260 43 260
A
PSKIP PSKI
Emits beep and blinks "S" indicator when a signal is
received on a memory or call channel.
[DIAL] ↔ [ ](2)/[ ](8)
†
11
PRIORITY WATCH
FM FM PRIO PRIO
145 180 14 180
A
µ 035 035
Pauses on a memory or
call channel when a
signal is received.
FM FM PRIO PRIO
14 145 180 180
A
µ 035 035
](5) ↔ [ ](6)
‡
[
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
91