Gps Alarm Setting - Icom IC-E92D Instruction Manual

8
GPS/GPS-A OPERATION
D GPS alarm setting
GPS alarm sounds when your own position is close the
specified position. This function can be set to use informa-
tion from the received channel, a specified GPS memory
channel, all GPS memory channels or a memory bank.
q Enter "GPS MEMORY" in message/position set mode.
➪
❮MENU screen❯ ❮MESSAGE/POSITION❯
(Push [MENU/ ]) (Rotate [DIAL]
• GPS MEMORY screen is displayed.
GPS MEMORY GPS MEMORY
r
RX RX
ALL ALL
A: A:
w Rotate [DIAL]
†
to select the desired memory bank or
memory channel.
• "RX", "ALL", one of the memory bank or memory channel can
be selected.
• Skip e and operate r when alarm RX, ALL, BANK A–Z set.
66
➪
❮GPS MEMORY❯
†
, then push [ ](5)
:SET :SET :SEL :SEL
:BACK :BACK
:EDIT :EDIT
C :ALM :ALM
e Push [ ](6), then rotate[DIAL]
memory channel.
r Push [C](CALL) to switch alarm function ON or OFF.
‡
.)
BANK A BANK A
<ADDITION> <ADDITION>
r 01:BAY 01:BAY-ARE
02:KOBE 02:KOBE-AIR
:SET :SET
:BACK :BACK
t Push [ ](4) to return to GPS MEMORY screen.
y Push [MENU/
✔ For your information!
• When "ALL" or memory channel is selected above step r,
alarm functions depending on "ALM AREA1" setting in the
GPS set mode (p. 69).
• When "RX" or memory bank is selected above step r,
alarm functions depending on "ALM AREA2" setting in the
GPS set mode (p. 69).
†
to select the desired
BANK A BANK A
<ADDITION> <ADDITION>
r 01:BAY-AREA 01:BAY AREA
02:KOBE 02:KOBE-AIR AIR
:SET :SET :SEL :SEL
:BACK :BACK :EDIT :EDIT
C :ALM :ALM
Alarm mark
ARE
AIR appears at 8-digits
:SEL :SEL
of memory name.
:EDIT :EDIT
C :ALM :ALM
] to return to frequency indication.