2: Clear Pattern - Yamaha SY85 Owner's Manual

[PATTERN] → [JOB] → [MENU] → 2:Clear Pattern → [ENTER/YES]
Entirely clears all patterns, a single pattern, or one instrument (key) from a se-
lected pattern.
PTN`JOB`Clear`Pattern`````Ptn```````````
[PTN]`ALL``KEY`<Funk1``V>`I00w``````````
PTN, ALL, KEY
Ptn (Pattern number)
Key

2: CLEAR PATTERN

F1 F2 F3
CS1 CS2 CS3
Range: PTN, ALL, KEY
Controls: [F1], [F2], [F3]
Range: 00 ... 99
Controls: [CS6], [-1] [+1], Dial
Range: 36 ... 96 (C1 ... C6)
Controls: [CS7], [-1] [+1], Dial, Keyboard
Press [F1] if you want to clear one pattern, [F2] if you want to clear all
patterns in memory, or [F3] if you want to clear a specified instrument (key)
from a selected pattern. If you select "PTN", the current pattern name is shown
between parentheses on the lower display line and [CS6] can be used to select
the pattern to be cleared.
If you select "KEY", the current pattern name is shown between parenthe-
ses on the lower display line, [CS6] can be used to select the pattern from
which an instrument is to be cleared, and [CS7] is used to select the key to be
cleared. The key to be cleared can also be directly specified by pressing the
appropriate key on the keyboard. The MIDI note number corresponding to the
selected instrument/key is shown on the lower display line while the note name
(C1 ... C6) is shown on the upper line.
Press [ENTER/YES] to begin the clear procedure. The following confirma-
tion display will appear:
PTN`JOB`Clear`Pattern`````Are`you`sure`?
[PTN]`ALL``KEY`<Funk1``V>`I00w``````````
Press [ENTER/YES] again to confirm that you want to go ahead with the
clear operation, or press [EXIT/NO] to cancel.
When the specified data has been cleared, "Completed!" will appear briefly
on the display.
F4 F5 F6
CS4 CS5 CS6
PATTERN EDIT MODE /
F7 F8
CS7 CS8
PATTERN JOB 203