Job; 1: Layer Controller Sync - Yamaha SY85 Owner's Manual

1: LAYER CONTROLLER SYNC

[PERFORMANCE] → [JOB] → [MENU] → 1:Layer Controller Sync → [ENTER/YES]
perfomance combination to match those of the voice assigned to the specified
"source" layer.
50
PERFORMANCE EDIT MODE /
This function changes the controller parameters of all voices in the selected
PERFORMANCE`JOB`Layer`Controller`Sync```
``````````````````````````Source`LayerA
F1 F2
CS1 CS2
Use the [CS8] slider to select the source layer (A, B, C, or D) from which
the controller data is to be copied, then press [ENTER/YES] to begin the layer
controller sync procedure. The following confirmation display will appear:
PERFORMANCE`JOB`Layer`Controller`Sync
Are`you`sure`?````````````Source`LayerA
Press [ENTER/YES] again to confirm that you want to go ahead with the
operation (which will overwrite all controller data for the voices assigned to all
layers other than the source layer), or press [EXIT/NO] to cancel.
When the data has been copied, "Completed!" will appear briefly on the
display, then the display will return to the mode that was engaged prior to
calling the layer controller sync function.

JOB

F3 F4 F5
CS3 CS4 CS5
F6 F7 F8
CS6 CS7 CS8