2: Voice Initialize - Yamaha SY85 Owner's Manual

[VOICE] → [JOB] → [MENU] → 2:Initialize → [ENTER/YES]
an existing voice, use this function to initialize all voice parameters.
116
VOICE EDIT MODE /

2: VOICE INITIALIZE

When you want to program a totally new voice "from scratch," rather than editing
VOICE`JOB`Initialize`
`
F1 F2
CS1 CS2
Press [ENTER/YES] to begin the initialize procedure. The following confir-
mation display will appear:
VOICE`JOB`Initialize`
Are`you`sure`?
Press [ENTER/YES] again to confirm that you want to go ahead with the
initialize operation (which will erase all current edited data), or press [EXIT/
NO] to cancel.
When the voice data has been initialized, "Completed!" will appear briefly
on the display, then the display will return to the mode that was engaged prior
to calling the voice initialize function.
JOB
F3 F4 F5
CS3 CS4 CS5
F6 F7 F8
CS6 CS7 CS8