9: Control Parameters - Yamaha SY85 Owner's Manual

[SONG] → [EFFECT EDIT] → [MENU] → 9:Control Parameter → [ENTER/YES]
be controlled by the minimum and maximum parameter values and assign MIDI
control numbers to the same parameters for MIDI effect control.
CTRL1/CTRL2 (CTRL1/CTRL2 switch)
Parameter (Effect parameter)
Min (Minimum parameter value)
174
SONG EDIT MODE /

9: CONTROL PARAMETERS

The parameters provided in this screen determine which effect parameters are to
EF`CTRL)````````(`Min``Max``Controller``
````1`:`off````````0%`100%`000:off``````
F1 F2
CS1 CS2
Range: 1, 2
Controls: [CS1], [-1] [+1], Dial
Selects CTRL1 or CTRL2 for assignment.
Range: Depends on selected effects.
Controls: [CS2], [-1] [+1], Dial
Selects the effect parameter to be controlled by the currently selected slider.
Since each effect has as many as 8 different parameters, the maximum number
of settings available for this parameter will be 8: "Ef1prm1" through "Ef1prm8"
on the display, for example, stands for "effect 1 parameter 1" through "effect 1
parameter 8". The parameters available for each effect are different, but the
name of the selected parameter will be shown between the parentheses on the
top line of the display. Parameters that can not be assigned to the sliders are
indicated by dashes ("--------") instead of a parameter name.
Range: 0 ... 100
Controls: [CS4], [-1] [+1], Dial
Sets the lower limit of the [CS1] or [CS2] control range. A setting of "0",
for example, means that when the slider is set to its lowest position the as-
signed parameter will also be set to its lowest value. A setting of "50" means
that the lowest slider position will set the assigned parameter to about 50% of
its range (a parameter with a range of 0 to 127, for example, would be set to
about 63).
If a controller is assigned to the "Min" parameter, an inverse "c" will
appear to the right of the parameter.
SONG EFFECT
F3 F4 F5
CS3 CS4 CS5
F6 F7 F8
CS6 CS7 CS8