2: Modulation Wheel Depth - Yamaha SY85 Owner's Manual

2: MODULATION WHEEL DEPTH

[VOICE] → [EDIT] → [MENU] → 6:Controller → [ENTER/YES] → [ENTER/YES] →
→ [MENU] → 2:MW Depth → [ENTER/YES]
The modulation wheel can be used to control a wide range of modulation effects.
The parameters provided in this screen set the depth of each effect type.
CTRL`MW````````Amod`Pmod`Fmod`EGBs`Coff`
``````````````````0````0````0```+0```+0`
Amod (Amplitude modulation depth)
Pmod (Pitch modulation depth)
F1 F2 F3
CS1 CS2 CS3
Range: 0 ... 127
Controls: [CS4], [-1] [+1], Dial
Sets the maximum depth of amplitude modulation (tremolo effects) applied
via the modulation wheel.
A setting of "0" allows no amplitude modulation, while a setting of 127
results in maximum amplitude modulation depth.
When setting up the low-frequency oscillator to apply amplitude modula-
tion, this parameter must be set to a value other than "0" if amplitude modula-
tion is to be applied via the modulation wheel.
Range: 0 ... 127
Controls: [CS5], [-1] [+1], Dial
Sets the maximum depth of pitch modulation (vibrato effects) applied via
the modulation wheel.
A setting of "0" allows no pitch modulation, while a setting of 127 results
in maximum amplitude modulation.
When setting up the low-frequency oscillator to apply pitch modulation, this
parameter must be set to a value other than "0" if pitch modulation is to be
applied via the modulation wheel.
F4 F5 F6
CS4 CS5 CS6
VOICE EDIT MODE /
F7 F8
CS7 CS8
6:Controller 83