Yamaha SY85 Owner's Manual page 394

Sample
DISPLAY
Sample`memory`full`!
Not`enough`memory`for`Volatie`!
Not`enough`memory`for`Non_Vol.`!
Sample`data`not`exists`!
Sample`data`protected`!
Over`internal`waveform`number`!
Over`Sample`number`!
MDR
DISPLAY
MDR`memory`full`!
MDR`data`already`exists`!
MDR`data`not`found`!
322 ERROR MESSAGES
APPENDIX /
COMMENTS
Since the sample memory is full, further loading of
sample data is not possible.
Not enough volatile memory.
Wave memory allocation setting cannot be changed.
Not enough non-volatile memory.
Wave memory allocation setting cannot be changed.
Since no sample exists in the specified sample number,
bulk transmission is not possible.
Since the waveform card is write protected, data save
and bulk transmission are not possible.
The maximum allowable number of waves was exceeded.
The maximum allowable number of samples was ex-
ceeded.
COMMENTS
Since the MDR's memory is full, loading of data is not
possible.
Since MDR data already exists, input of data is not
possible.
No data exists in the specified MDR file.