13: Transpose - Yamaha SY85 Owner's Manual

[SONG] → [A]~[H] → [SONG JOB] → [MENU] → 13:Transpose → [ENTER/YES]
the specified "offset" in semitones.
Meas (First & last measure numbers)
Ofst (Offset)
196
SONG EDIT MODE /

13: TRANSPOSE

Transposes all notes in the specified track and range of measures up or down by
This job is not available when the rhythm track (track 9) is selected.
SONG`JOB`Transpose````````Meas``````Ofst
``````````````````````````001ø`001```+0`
F1 F2
CS1 CS2
Range: 001 ... 999
Controls: [CS6], [CS7], [-1] [+1], Dial
Range: -99 ... +99
Controls: [CS8], [-1] [+1], Dial
Use the GROUP [A] through [H] keys to select the track on which the
transpose operation is to be performed (A = track1, B = track 2, and so on).
The LED of the selected track will glow red while the LEDs of all other tracks
containing data glow green.
Use [CS6] and [CS7] to specify the first and last measure numbers in the
range of measures over which you want to transpose note data. Use [CS8] to
set the number of semitones by which the notes will be transposed up or down.
Minus (-) values transpose down while plus (+) values transpose up.
Press [ENTER/YES] to begin the transpose procedure. The following confir-
mation display will appear:
SONG`JOB`Transpose````````Meas``````Ofst
Are`you`sure`?````````````001ø`001```+0`
Press [ENTER/YES] again to confirm that you want to go ahead with the
transpose operation, or press [EXIT/NO] to cancel.
When the data has been transposed, "Completed!" will appear briefly on the
display.
SONG JOB
F3 F4 F5
CS3 CS4 CS5
F6 F7 F8
CS6 CS7 CS8