Job; 1: Key Data Initialize - Yamaha SY85 Owner's Manual

[VOICE] → [JOB] → [MENU] → 1:Key Data Initialize → [ENTER/YES]
When you want to program a single drum key "from scratch," rather than editing
an existing key, use this function to initialize all data for the specified drum key.
DRUM`JOB`Key`Initialize````````Key
`````````````````````<BD6`````>``C1``

1: KEY DATA INITIALIZE

F1 F2 F3
CS1 CS2 CS3
Use the [CS7] slider or the keyboard to enter the drum key you want to
initialize (C1 ... C5), then press [ENTER/YES] to begin the initialize proce-
dure. The following confirmation display will appear:
DRUM`JOB`Key`Initialize````````Key
Are`you`sure`?```````<BD6`````>``C1
Press [ENTER/YES] again to confirm that you want to go ahead with the
initialize operation (which will erase all current edited data), or press [EXIT/
NO] to cancel.
When the drum key data has been initialized, "Completed!" will appear
briefly on the display, then the display will return to the mode that was en-
gaged prior to calling the key data initialize function.
F4 F5 F6
CS4 CS5 CS6
DRUM VOICE EDIT MODE /
F7 F8
CS7 CS8

JOB

141