Scanner Components; Front View - Kodak Ngenuity 9000 Series User Manual

Scanner components

Front view

A-61662 April 2010
6
1 Control Panel — allows you to initiate scanner functions directly
from the scanner.
2 Cork pad — assists in preventing multifeeds by making it easier
for the skimmer rollers to grab one document at a time.
3 Feeder table — place the documents to be scanned on the feeder
table. It can be raised and lowered using the feeder table buttons
on the control panel.
4 Feeder table extender — provides a support for longer
documents that extend beyond the standard length. The extender
can be pulled out to add approximately 7 inches (18 cm) to the
feeder table.
5 Document feed guides — used to guide document(s) into the
scanner's transport. They can be width-adjusted independently,
which allows for left-, right-, or center-feeding of documents.
6 Skimmer module — contains two rollers that assist in grabbing
and feeding documents into the scanner transport. The skimmer
assembly can be placed in an up position for manual feeding or a
down position for automatic document feeding.
1
2
3
4
5
1-3