3-6
Multifeed and MF Ignore — when illuminated, indicates a multifed
document or warning. This indicator will momentarily light and remain lit
or blink depending on the multifeed condition. For example:
• If the multifeed mode is set to Stop, the indicator remains lit and the
scanner stops when a multifeed is detected.
• If the multifeed mode is set to Notify, the indicator will light
momentarily along with a sound or prompt for each multifeed that is
detected while scanning.
For more information, see Chapter 4, Advanced Features.
The MF Ignore button toggles the multifeed ignore feature on and off.
When it is on, the scanner will ignore the multifeed sensor during the
next page fed (one page only), and the Multifeed LED will blink.
By pressing the MF Ignore button during batch scanning, you can
preempt the impending multifeed alarm without forcing a batch stop.
This turns off the MF alarm detection for a single page starting with the
next leading edge seen by the page entry sensor. To turn off MF
detection for a series of documents, press and hold the MF Ignore
button.
A-61662 April 2010